By undergoing preventative maintenance and examining your plumbing system often, you can keep yourself off from expensive repair bills as well as the steady, slow expense that occurs due to leaks and drips. Below are 10 tips to avoid plumbing repairs.

Look out for any leaks

Leaks can occur in numerous areas in a plumbing system hence the need to address them right away to curb water damage and waste. Occasionally, look out for any of these signs: toilets that continue to run after flushing; constant wetness around toilets and faucets; pipes with mineral deposits or rust; loose tiles or soft walls that could indicate leakage in a wall; dampness in sink cabinets; and soft flooring near washing machines, water heaters, dishwashers, bathtubs and toilets. You can use water leak detection systems or automatic water shut off valves to alert you in case there is a leakage.


Observe and re-do any form of caulking around sinks, toilets, showers and bathtubs that might cause water to infiltrate the nearby structure.

Malfunctioning or old fixtures

In general, boilers, water heaters, washing machines, dishwashers and toilets that are over twelve years of age should be replaced. New appliances are more efficient and energetic too. Always check the serial number as it indicates the year the item was manufactured. Different companies will use different coding methods hence the need to do a fast internet search to know what to consider. Also, replace cracked or hardened hoses on dishwashers and washers as well as old faucets to minimize the risk of breakage.


Know the location of all shut-off valves and switch them off, and back to their old position, to ensure they do not open up when shutting the water off. While doing the above, look for any signs of corrosion that could result in an unnoticed leak. Replace any malfunctioning valves. Lastly, ensure your family knows the location of the shut-off valves, mostly the major one.

Minimal water pressure

Test for minimal water pressure through allowing water to run the tub faucet and eventually opening the faucet in the kitchen. When the pressure goes down after opening the second faucet, it is advisable to find a plumber to examine the problem. Minimal water pressure occurs as a result of the build-up of sediments or leaks in pipes.

Septic tank

Persistent wet areas around your septic system could be a sign of leakage. Even though it is important to pump a septic tank, no rule governs how often you should pump the tank. It will depend on some factors. They include the temperature in your area, the design of the system, the size of tank, presence of a garbage disposal and the number of people in your home. Seek the services of a septic expert to know the frequency of pumping your septic system.

Freezing pipes

People who live in areas that experience winter often should maintain and install insulation all round their water pipes. Be more cautious with pipes that have frozen before or exposed to cold temperatures or the wind.


Avoid clogged drainpipes by cleaning them with an environment-friendly drain cleaner often. The kitchen disposal can be easily cleaned by sending ice all the way through it to eliminate any accumulated grease.

Water heater and boiler

Every year, you should examine and clean the boiler ahead of the heating season. Additionally, plumbers recommend that you clean and drain your heater annually. Most individuals prefer to hire an expert to deal with these tasks due to their inclusion in the plumbing contract.

Basement flooring

People who reside in areas with poor drainage or prone to flooding should install a sump pump in the basement. Also, one can put up a water powered sump pump or battery backup sump pump as a preventative measure in the event of a storm.

Whether you choose to hire an expert or perform the above maintenance checks by yourself, it is a valuable investment of your money and time

plumberWe all know that not all plumbing companies can provide that satisfying service you are searching for. I remember once I hired a plumbing company to fix my pipes, and this company ended up charging me an expensive fee that was not quoted on the invoice. After a few weeks, I had to call another company simply because the first company came to my place and did what they thought was a satisfying job. These types of plumbing services exist in every area and should be avoided at all costs. Below are some tips that will help you to choose the right plumbing company:

1. Ask to see the state license

Any plumbing company by law should have a certified license. it’s advisable to ask for a certified license from the plumbers who have been sent to your home ( any good certified plumber has his/her own certificate). Some people have reported things going missing from their homes just because they forgot to ask for the details of the individuals who were sent to their homes.

2. Business stability

Before hiring the plumbing company, it’s important to do a small search on the internet about their stability. I had to check my plumbing companies profile online. It’s true that the internet has any information you want. Check for the basic information like how long the plumbing company had been in your area and for how long it has been in business. A search like this will give you an idea of the service the company has been offering to its clients.

3. Price

Most companies have hidden costs that they fail to mention on their invoices. My first plumbing company ended up charging me for small extra costs like the amount of fuel they had consumed and additional charges on the number of hours they had spent in my house. I tried to complain, but I ended up paying. The best thing to do as a first timer is to make a personal call to the company. Talk to the person in charge and make sure that he/she explains the breakdown of their costs to avoid any extra charges.

4. Avoid plumbers who advertise on television and radio

The advertisements cost money which means they will have to compensate for the advertisements by introducing extra costs on your bill. Personally I believe any certified plumbing company will provide the same service as that company always showing up on your television during a small break. Also, some Ads tend to be very misleading. Try a private company owned by a family. They tend to charge less.

5. Hire the company on a weekday

This point has to do with the cost. Most plumbing companies will charge an extra during the weekends.

6. Get references

Before paying your money to this plumbing companies ask your neighbors on which company has the best services. Customer’s reviews will tell you a lot about an enterprise. I once asked about a nearby plumbing company and was shocked by the comments people made. Some even complained that the plumbers did more damage than repairs to their piping systems. They saved me the extra costs I would have incurred if I would have hired the plumbing company with no certification.

7. Check if the company offers a warranty or a guarantee of their work

Who wants to pay for the same service twice? I don’t. A good company would fix your repairs for free if the first job they did in your house wasn’t up to your standard. Read through the warranty and make sure that you understand all the details. Every warranty has an expiry period. Make sure you know how long you have before your warranty expires. Keep it safe as the company won’t do any repair if you happen to misplace your original order.

8. Check if the company is insured

This will save you any extra costs in case your plumber gets injured during the job. A friend of mine once hired an unlicensed plumber to work on her house. The worker ended up flooding her house that bridged her home insurance as the plumber was not from an insured company.Insurance companies will not pay you for a small error like hiring a plumber who is not insured to work in your house.

9. Choose a company that operates 24 hours

No one knows when your pipes will block. The best plumbing company is one that works 24 hours a day. You need a company that you can trust. A 24-hour plumbing company will be of good service to you as they can respond to your calls at any time of the day or night.

10. Check for background

Ask the company to provide you with the technician’s experience. The background should have all drug tests and any information that is a need to know about their employees. You need a company that you can feel safe leaving their employees in your house without the worry of losing your valuables.

11. Payment methods

The best way of paying a plumbing company is through a valid check or by use of a credit card. Doing this keeps records for future references. Paying cash is never a good idea. It will be hard to track down the plumber who serviced your house in case the job he did was not satisfactory. Be cautious if the worker asks for cash. He/she might be an intruder disguised as a plumber.Also never pay the whole amount before inspecting the job done. Pay a small amount upfront to prove that you are willing to pay the full amount once the job is done. This is a good way of building trust between you and the hired company.

12. Clean-up

We can all agree that the plumbers have a tendency to leave the place all dirty and untidy. Make an inquiry on what type of cleanup service the company offers. Some people end up cleaning the grease and all the old materials the plumbers leave behind once they are done with the job. In a case like this, if the company doesn’t offer after cleaning services, pay the worker some cash to do it for you.


If you are looking to relocating gas lines, then you need to call a certified gas line plumber. Remember this is a too sensitive task that should not be handled by a quack or an amateur. Thus, you need to do your homework pretty well before settling on any gas line plumbing expert out there. Below are some of the questions you need to ask your prospective gas line plumber before making that vital decision of hiring.

Are You Certified?

Ask your potential gas line plumber whether or not he is certified. It is advisable to go for a company that is certified to install different types of gas lines. Stay away from uncertified plumbing companies since they may not be able to meet your plumbing needs.

Are You Experienced?

Experience is vital in any type of undertaking. A plumber who has been installing gas lines for a long time is actually the right one to go. This is because such a provider is well-versed with the job and is not going to let you down. If possible, favor companies with over 5 years of experience and avoid the newly-established ones.

Do You Have the Right Plumbing Equipment?

The company you are considering should be in possession of the right plumbing equipment. For instance, they must have gas leak detection equipment since the gas lines may be tampered with while being moved. Other installation tools are also necessary, so you should ask your prospect company whether or not they have the requisite tools. If they lack the equipment, do not hesitate to look elsewhere. Avoid at all costs the companies that borrow working equipment from the neighboring contracting firms.

Are You Licensed?

Licensing is vital. Ask your prospect company whether they are properly licensed to work in your city or state. If possible, ask to see the licenses in order to confirm their validity. Avoid dealing with unlicensed companies since they are said to be operating illegally.

Are You Adequately Insured?

Check whether or not your prospect plumbing company carries adequate insurance cover. This is vital because anything can happen while the plumber is moving your gas line. So, you must ensure that you are working with a properly insured plumber. Ask for a proof of insurance before making your final decision.

Are You Ready to Provide References?

Always ask for some references before hiring any gas line plumber out there. You want to talk to some of the homeowners who had their gas lines relocated recently. If the contractor is not ready and willing to provide a referencing list, consider looking elsewhere.


To conclude, take your time to find a qualified and experienced plumber if you are relocating gas lines. Actually, you should begin your search for a plumber when you do not necessarily need one. That way, you will keep their contact details safely so that you may call them when the need arises.

save waterThere are many benefits which come when you reduce the amount of water you use on daily basis. For instance, you will conserve the vital water sources in your region and in turn saving your energy and money. It is estimated that in the next 10 years, about 50 states in USA will experience water shortage. This is why you should start embracing Water-Efficient Plumbing techniques on toilets, shower-heads and faucets.

Some causes of water shortage

· Natural phenomena such as drought lead to less precipitation hence a reduction in mountain snowpack and volume of water at reservoirs.

· Increased usage of water in arid and semi-arid region due to population growth.

· Poor infrastructure which lead to leakages. For instance, gallons of water are lost daily due to leaking pipes.

Benefits of water-efficient plumbing

By saving water you will help in reducing the pressure incurred while repairing infrastructure hence maintaining low tax levels. Since a lot of energy is used to treat and transport water on daily basis, you will be saving energy by conserving water. You will ensure that your region is in a better passion of withstanding droughts. Lastly, there will be no financial turmoil which might arise from water crisis in a metropolitan area.

The best water-saving fixtures at home

If you have never experienced water shortage, you are quite lucky. Most regions, especially in USA, are facing water crisis and it is a hectic experience. To ensure that you are aiding the government in saving water you should try installing the following:

1. Install a Pressure Reducing Valve (PRV)

The higher the pressure of water coming from the taps, the higher the risk of spillage. Most homes use water pressure of over 70 psi. A majority of the homeowners don’t have a clue on how much water pressure they are using. This is why you should call a plumber and have him inspect the pressure and install the PRV for you. A home will go well with a water pressure of about 35 psi. Furthermore, high pressure may result in cracking of pipes.

2. Use of performance shower-heads

Taking a shower bath is very relaxing especially during the hot seasons. However, most people don’t realize that they are wasting a lot of water while using the standard shower heads which use about 2.5 gallons per minute. By using performance shower heads, you will end up saving 30% of the showering water.

3. High efficient toilet (HET)

The old toilet systems will use 3.5 gallons of water per flush. In contrary, the high efficiency toilets use only 1.3 gallons of water per flush. These toilets use flushing systems such as the Class 6 technology hence they end up saving more water than the older toilets. It has been found that most commercial buildings fail in predicting the amount of water used in urinals. This is probably due to the fact that the sensor is inaccurate, poorly maintained or damaged due to misuse. Therefore, sensor activated valves with accurate flush rates should be installed on such systems.

4. The re-circulating hot water systems

Each time you are going in for a hot shower early in the morning, you will often wait for the cold water to go down the drain before hot water kicks in. By using re-circulating hot water kits, warm water will be constantly flowing through your system hence saving the wastage of cold water.

5. Water saving faucets

By using the new redesigned faucets, you will reduce the gallons of water used per minute from 2.2 to 1.5. Moreover, the new faucets allow you to maintain a good water pressure and they come with in-built water filters which allow you to make bottled water.

Is water conservation possible without water efficiency?

It is possible to conserve water without involving water efficiency though it is very difficult. In addition if water efficiency is eliminated, sustainability will not be achieved. In other words, water conservation and efficiency go hand in hand.

Water efficiency implies using available resources responsibly, plan for usage and inventing scientific technologies which are friendly to citizens.

Final verdict

By embracing water-efficient plumbing techniques at your home, you will end up saving thousands of resources. Some of the fixtures might be expensive to purchase but in the long run, you will enjoy the benefits of water conservation. In conclusion, you should also ensure that you minimize the food waste disposal rate as it will reduce the amount of food grown at farms hence the water usage.