save waterThere are many benefits which come when you reduce the amount of water you use on daily basis. For instance, you will conserve the vital water sources in your region and in turn saving your energy and money. It is estimated that in the next 10 years, about 50 states in USA will experience water shortage. This is why you should start embracing Water-Efficient Plumbing techniques on toilets, shower-heads and faucets.

Some causes of water shortage

· Natural phenomena such as drought lead to less precipitation hence a reduction in mountain snowpack and volume of water at reservoirs.

· Increased usage of water in arid and semi-arid region due to population growth.

· Poor infrastructure which lead to leakages. For instance, gallons of water are lost daily due to leaking pipes.

Benefits of water-efficient plumbing

By saving water you will help in reducing the pressure incurred while repairing infrastructure hence maintaining low tax levels. Since a lot of energy is used to treat and transport water on daily basis, you will be saving energy by conserving water. You will ensure that your region is in a better passion of withstanding droughts. Lastly, there will be no financial turmoil which might arise from water crisis in a metropolitan area.

The best water-saving fixtures at home

If you have never experienced water shortage, you are quite lucky. Most regions, especially in USA, are facing water crisis and it is a hectic experience. To ensure that you are aiding the government in saving water you should try installing the following:

1. Install a Pressure Reducing Valve (PRV)

The higher the pressure of water coming from the taps, the higher the risk of spillage. Most homes use water pressure of over 70 psi. A majority of the homeowners don’t have a clue on how much water pressure they are using. This is why you should call a plumber and have him inspect the pressure and install the PRV for you. A home will go well with a water pressure of about 35 psi. Furthermore, high pressure may result in cracking of pipes.

2. Use of performance shower-heads

Taking a shower bath is very relaxing especially during the hot seasons. However, most people don’t realize that they are wasting a lot of water while using the standard shower heads which use about 2.5 gallons per minute. By using performance shower heads, you will end up saving 30% of the showering water.

3. High efficient toilet (HET)

The old toilet systems will use 3.5 gallons of water per flush. In contrary, the high efficiency toilets use only 1.3 gallons of water per flush. These toilets use flushing systems such as the Class 6 technology hence they end up saving more water than the older toilets. It has been found that most commercial buildings fail in predicting the amount of water used in urinals. This is probably due to the fact that the sensor is inaccurate, poorly maintained or damaged due to misuse. Therefore, sensor activated valves with accurate flush rates should be installed on such systems.

4. The re-circulating hot water systems

Each time you are going in for a hot shower early in the morning, you will often wait for the cold water to go down the drain before hot water kicks in. By using re-circulating hot water kits, warm water will be constantly flowing through your system hence saving the wastage of cold water.

5. Water saving faucets

By using the new redesigned faucets, you will reduce the gallons of water used per minute from 2.2 to 1.5. Moreover, the new faucets allow you to maintain a good water pressure and they come with in-built water filters which allow you to make bottled water.

Is water conservation possible without water efficiency?

It is possible to conserve water without involving water efficiency though it is very difficult. In addition if water efficiency is eliminated, sustainability will not be achieved. In other words, water conservation and efficiency go hand in hand.

Water efficiency implies using available resources responsibly, plan for usage and inventing scientific technologies which are friendly to citizens.

Final verdict

By embracing water-efficient plumbing techniques at your home, you will end up saving thousands of resources. Some of the fixtures might be expensive to purchase but in the long run, you will enjoy the benefits of water conservation. In conclusion, you should also ensure that you minimize the food waste disposal rate as it will reduce the amount of food grown at farms hence the water usage.